Solar street lights promise a simple story: no trenching, no cabling, no electricity bill. And in industrial parks, campus roads, parking areas and rural roads, that story is mostly true - provided the system was sized honestly. Undersized lights are the industry's biggest embarrassment: brilliant on the sale, dim by 2 a.m. This guide covers what actually matters.
All-in-One vs Split Systems
All-in-one (integrated): panel, battery, controller and LED in one compact unit on the pole. Fast to install, minimal theft exposure of components, ideal for parks, campuses, parking lots and residential roads up to ~60 W lamp power.
Split systems: separate panel, battery box and lamp - necessary for higher power (100 W+), longer autonomy nights, or when the panel must tilt independently of the lamp orientation.

Sizing Against Real Nights, Not Brochures
Honest sizing starts with three questions:
How many dark hours per night, year-round? Winter nights in southern Africa or South America run 12-13 hours; a light rated for "8 hours" fails exactly when darkness is longest.
How many cloudy days of autonomy? Three nights of battery autonomy is the professional standard for critical roads; one night is a fair-weather product.
Full-night or motion-adaptive operation? Motion-sensing modes (100% brightness on approach, 30% otherwise) can cut required battery capacity nearly in half - and dramatically extend real-world reliability.
From these, the panel wattage and battery capacity follow mathematically. A typical 60 W LED lamp running all night with 3-night autonomy needs roughly 400-500 Wh of usable battery per night and a panel sized to recharge that in the shortest winter day.
Battery Chemistry: LiFePO4 Is the Standard Now
LiFePO4 lithium batteries have replaced gel/lead-acid in quality solar street lights: deeper usable depth of discharge, 2000+ cycles, wide temperature tolerance and 5+ year service life. Check that the battery is a named-capacity LiFePO4 pack with a protection board (BMS), not an unspecified "lithium battery".

Pole, Light Distribution and Installation Rules
Pole height and spacing: 4-5 m poles with 30-40 W lamps for paths and parking; 6-8 m with 60-100 W for roads. Spacing typically 3-4 times pole height.
Light distribution: ask for the photometric file (IES/LDT) - a proper road-optimised lens lights the road, not the sky.
Panel orientation: face the sun, not the road. On east-west roads, an all-in-one's fixed horizontal panel loses 20-30% yield - a split system with tilted panel pays for itself.
Theft and vandalism: in public areas, prefer integrated units with anti-theft bolts and lithium packs inside the lamp body, not in a ground box.
What to Ask Your Supplier
Request the sizing calculation for your exact location (latitude, insolation, winter night length), the battery's usable Wh - not marketing Ah - and the LED driver's real efficiency curve. Singfo Solar supplies solar street lights from 20 W to 120 W with LiFePO4 storage, IP65 ratings, remote monitoring options and full sizing support as part of a product range that spans panels, inverters, batteries and complete systems. Send your road layout and location, and get a lighting plan with lux levels and autonomy calculations attached.