The SF-ODUD 1200W-4000W input voltage is flexible (110V/220V self-adaptive), the inverter output is 220VAC±10% or 110VAC±10%, the frequency is 50/60Hz±1%, and the pure sine wave is compatible with sensitive equipment.
| Model | SF-OFUD1.2 | SF-OFUD1.6 | SF-OFUD2.4 | SF-OFUD4 | |
| AC Input voltage | 220VAC(standard) | ||||
| Input voltage range | 154-264VAC±3V(Nor Model) 185-264VAC±3V(UPS Model) 110V Model:77-132VAC±3V(Nor Model) 92-132VAC±3V(UPS Model) | ||||
| Input frequency | 50/60Hz±5% | ||||
| Out put power | 1200W | 1600W | 2400W | 4000W | |
| AC model output Voltage | The output voltage under the mains is the same as the input voltage | ||||
| AC model output frequency | The output frequency under the mains is the same as the input freguency | ||||
| Battery model output voltage | 220VAC+10%(customizable 110VAC+10%) | ||||
| Battery model output frequency | 50HZ or 60HZ+1% | ||||
| Battery model output wave | Pure sine wove | ||||
| Battery type | External lead-acid battery,Gel battery,water battery or Lithiun battery | ||||
| Battery voltage | 12VCD | 24VCD | 24VCD | 48VCD | |
| Battery charging voltage | 13.7VDC | 27.4VDC | 27.4VDC | 54.8VDC | |
| Maximum PV array power | 12V:800W 24V:1600W | 48V:6400W | |||
| Solar input voltage range | 12V:MPPT 15V-I0VDC 24V:MPPT 30V-I50VDC 48V:MPPT 60V-I50VDC | ||||
| Maximum PV Display Open Circuit Voltage | 12V:PWM 50VDC 24V:MPPT I50VDC 48V:MPPT I50VDC | ||||
| Maximum solar charging curent | 60A | 120A | |||
| Maximum AC Charge Current | 40A | 33A | 50A | 41A | |
| Transter time | ≤10ms（UPS Mode）/≤20ms（INV Mode) | ||||
| load peak ratio | (MAX)3:1 | ||||
| Protective function | Under the mains:input over current fuse Under inverter: overload protection,short circuit protection,low voltage protection, (with battery anti-reverse connection, board). | ||||
| Status Display | You can view parameters such as AC voltage,ACtrequency,PV voltage,Pv curent output voltage. output frequency, battery voltage, load current and other parameters by turning the page keys. | ||||
| Voice prompt | low battery protection buzzer long beep Blow battery buzzer beeps every second Machine fault burzer beeps Overioad buzzer beeps When the overload is less than 130%, the buzzer will sound every second,and the output wil be turned off after 30s. When the overioad is greater than 150%, the output will be turned off after 300ms. | ||||
| Operating temperature | (-10℃-50℃) | ||||
| Storage temperature | ( -15℃-45℃) | ||||
| Relative temperature | (-10°C-90°C) no condensation | ||||
| Noise | <45dB | ||||
WANT TO SPEAK TO US?
We specialize in solar energy solutions for whole complete set with solar panel, inveter, battery, bracket, cable etc.
Acceptable for customized dimensions and power in solar panel, adjustable for solar power system configuration base on your real situation.
